Created with Sketch. Created with Sketch.

Shop by Category

Small Decal Application

Small Decal and Sticker Application Instructions

Step 1: Rub the decal to be sure the transfer tape is properly adhered to the decal.

Small Decal Application, Decal Preparation

 Step 2: Clean and dry the desired area. Decals will stick best to clean smooth surfaces.

Small Decal Application, Cleaning the window

 Step 3: Remove the paper backing slowly making sure the decal stays adhered to the transfer tape.

Small Decal Application, removing the backing paperSmall Decal Application, getting ready to apply the decal

 Step 4: Carefully position the decal over the desired area without letting it touch the surface. One the decal sticks it will be nearly impossible to re-position without destroying it. Push down one edge and rub it down from one side to the other with a hard edged object like a debit card, pushing out any air bubbles and making sure the decal is fully adhered to the surface.

Small Decal Application, positioning the decalSmall Decal Application, rubbing the decal down

 Step 5: Slowly remove the transfer tape, making sure no part of the decal remains on the transfer tape.

Small Decal Application, removing the transfer tape from the decal

 Step 6: Check for air bubbles. In most cases air bubbles can be worked to edge of the decal, but if not, a pin hole will allow the air out and become virtually invisible once the bubble is gone. Tiny bubbles will go away on their own after a few days in the sun.

Small Decal Application, final check of the decal