Windshield Decal Application
Windshield Decal and Windshield Sticker Application
Step 1: Clean the surface thoroughly.
Step 2: Without removing the backing paper, position the decal on the windshield making sure it is centered and straight. Secure on each end with masking tape.
Step 3: Run a longer piece of masking tape across the center of the decal at the center.
Step 4: Remove the tape from one end, flip the side of the decal over and remove the backing paper from that side of the decal all the way to center tape line. Use scissors cut away that half of the backing paper, being carefully not to let the exposed decal touch the surface yet.
Step 5: While still holding the exposed half of the decal away from the surface, carefully begin to rub down the decal starting from the center with a hard edged object like a credit or debit card, working from the middle and ending at the edge closest to you.
Step 6: Now that half of your decal is secure, peel the backing paper off the rest of your decal and carefully rub down the decal onto the surface, again starting at the middle and ending up at the edge closest to you.
Step 7: Slowly peel away the transfer tape at an angle towards you, never pull straight up on the transfer tape.
Step 8: Check you decal for bubbles and make sure all edges of the vinyl are properly adhered to the surface.